Principle descriptions
The water flows through the screen and the particles are retained on the inside of the screen of the filter element. The filtered water then flows out through the outlet.
When the particles accumulated to a certain number and the pressure differential increases to the pre-determined level, the flushing cycle starts.
It include two steps: First, the automatic drain valve opens on the drainage outlet. Then, electronic motor drives the cleaning brushes which are inside the screen, the solids are expelled through the drain valve.
Filters continue to supply filtered water even during the flushing cycle.The whole working system is controlled by a smart box which has several control modes: pressure differential, time, manual and PLC.
Advantages:large filtration area, wide filtration range, short flushing time, low water consumption, low pressure loss etc.
Technical parameters
Working pressure |
1.8-16bar |
Flow capacity |
4000m3/h(max) |
Working temperature |
<65℃ |
Filtration precision |
50-4000 micron |
Pressure loss |
0.2-0.5bar |
Cleaning time |
10-200S |
Inlet/out connection |
Flange(BSP optional) |
Power |
380V/50Hz |
(NOTICE: Please contact us if your working condition don't meet these demands. Customized is available)
Filter material
Housing |
Carbon steel(SS304/SS316L optional) |
Brush holder |
SS304/SS316L |
Screen |
SS304(SS316L optional) |
Drain valve |
Cast iron(copper/SS optional) |
Controller |
PVC(Aluminum/Stainless steel optional) |
Seal ring |
EDPM rubber |
Note: nickel, titanium alloy and other special materials can be selected according to customers' requirements, please contact us for more information.
The size chart
FL series self-cleaning filter specification data table
Models |
A |
B |
C |
D |
E |
Drain outlet (mm) |
Motor power (KW) |
Flow (m³/h) |
Weight |
DLD-FL-50 |
217 |
500 |
630 |
500 |
450 |
25 |
0.09 |
19 |
50 |
DLD-FL-65 |
217 |
500 |
630 |
500 |
450 |
25 |
0.09 |
30 |
70 |
DLD-FL-80 |
237 |
1000 |
420 |
550 |
550 |
40 |
0.09 |
50 |
80 |
DLD-FL-100 |
247 |
1010 |
425 |
550 |
565 |
40 |
0.09 |
80 |
105 |
DLD-FL-125 |
257 |
1060 |
425 |
550 |
565 |
50 |
0.18 |
125 |
130 |
DLD-FL-150 |
257 |
1200 |
550 |
598 |
620 |
50 |
0.18 |
150 |
180 |
DLD-FL-200 |
309 |
1400 |
718 |
660 |
680 |
50 |
0.25 |
320 |
235 |
DLD-FL-250 |
325 |
1680 |
848 |
708 |
725 |
50 |
0.25 |
490 |
280 |
DLD-FL-300 |
380 |
1720 |
930 |
813 |
830 |
50 |
0.37 |
710 |
420 |
DLD-FL-350 |
478 |
2050 |
1080 |
940 |
956 |
50 |
0.37 |
970 |
537 |
DLD-FL-400 |
550 |
2280 |
1228 |
1000 |
1020 |
50 |
0.37 |
1260 |
620 |
DLD-FL-450 |
654 |
2450 |
1372 |
1180 |
1190 |
50 |
0.37 |
1600 |
685 |
DLD-FL-500 |
706 |
2900 |
1508 |
1255 |
1285 |
50 |
0.55 |
1970 |
738 |
DLD-FL-600 |
840 |
3450 |
1828 |
1298 |
1320 |
80 |
0.55 |
2500 |
860 |
DLD-FL-700 |
1008 |
3960 |
2160 |
1460 |
1680 |
80 |
0.55 |
3500 |
1400 |
(Please see detailed dimension in additional drawing)
The table of pressure loss (based on the filtration precision 150 micron)
Installation and connection
1、Installation
Installing form A
Installing form B
Installation drawing of two filters in parallel
http://www.cdfsfilter.com/